Unofficial archive. This is a read-only, community-run archive of the Apple Support Community. It is not affiliated with or endorsed by Apple Inc.

iPhone 17 charging connector issue

My iphone 17 recently shown liquid detected in charging connector, I had taken it to Apple Store and they diagnosed that charging pins are burnt and recommended to replace entire logic board for the same , which is costing 43k but it doesn’t make any sense, why Apple can’t just replace charging connector?

3 replies

If an Apple Authorised Service Provider examines an iPhone and says that the charging connector is burnt or damaged and the logic board needs to be replaced, this generally indicates that the charging connector is not treated as a simple, independently replaceable component in that particular iPhone model.


Unlike the battery, which is a separate component that can be disconnected from the logic board and replaced, the charging connector assembly may be soldered or otherwise integrated into the device's internal circuitry. Depending on the iPhone model, the connector may be mounted directly to the logic board or connected to it through a separate flex/charging assembly. Therefore, the exact construction varies by model.


The important point is that the charging connector is not necessarily a plug-in component that an authorised technician can simply unplug from the logic board and replace in the same manner as a battery. If the connector or the circuitry around it has suffered significant electrical or physical damage, Apple may prescribe replacement of the entire logic-board assembly rather than attempting a board-level repair.


This is also why a statement such as “the charging connector is burnt, so the logic board has to be replaced” does not necessarily mean that the entire board has physically burnt. The damage may be confined to the connector, its solder joints, charging circuitry, or related components on the board. Apple's authorised repair procedure may nevertheless specify replacement of the complete logic board because Apple generally uses approved module-level repair procedures rather than component-level microsoldering.


Search for accessories that have completed MFi certification. Once an accessory has completed MFi certification requirements and is reported to Apple as sold/distributed, it will be searchable in our public database of authorized Lightning, headset, charging, iAP-enabled, and Find My network-enabled accessories.


Learn how to identify counterfeit or uncertified Lightning-based accessories.


You may try this (The suggestion is intended as a guide to help you find the right options and should not be interpreted as an endorsement or promotion of any product. Please conduct your own research and make an informed purchasing decision.) --> https://amzn.in/d/06mPoWvc


Thanks SravanKra for the valuable input, as per what apple genius told me only few charging pins are burnt rest circuit is fine , but it still doesn’t make any sense that they are asking me to pay 43k just for charging ping issue,seems like Apple finds a way to empty your pocket anyways they can . I finally got MagSafe and 30W charger but will find a way to get just the charging connector replaced